In-Situ Chemical Oxidation BTEX
ORIN successfully treated BTEX contaminated groundwater utilizing in-situ chemical oxidation. Approximately 70 gallons of catalyzed sodium persulfate at 18-percent solution was injected into each of the forty-two injection points at depth-specific intervals. Each interval received approximately 20-gallons of treatment chemistry. The injection points were spaced in a grid pattern to treat the contaminant plume. The treatment chemistry injection was coordinated with vacuum extraction on adjacent wells to control hydraulic activity more accurately and to improve injection efficiency. This facilitated preferred treatment chemistry coverage within the targeted treatment area.
More to explorer
In-situ Treatment of PFAS
In-situ Treatment of PFAS Facebook Twitter LinkedIn The airport tested the AFFF nozzle system every 6 months into grassy areas along the air strip. Across
Wastewater Treatment of PFAS
Wastewater Treatment of PFAS Share on facebook Facebook Share on google Google+ Share on twitter Twitter Share on linkedin LinkedIn Rinse water from fire trucks
BAM Injection PFAS
BAM Injection PFAS Share on facebook Facebook Share on google Google+ Share on twitter Twitter Share on linkedin LinkedIn ORIN conducted a pilot test to
BAM Soil Mix PFAS
BAM Soil Mix PFAS Share on facebook Facebook Share on google Google+ Share on twitter Twitter Share on linkedin LinkedIn ORIN conducted a pilot test
BAM Booms Treating PFAS
BAM Booms Treating PFAS Share on facebook Facebook Share on google Google+ Share on twitter Twitter Share on linkedin LinkedIn ORIN conducted a pilot test
BAM Injection Chlorinated Solvents
BAM Injection Chlorinated Solvents Share on facebook Facebook Share on google Google+ Share on twitter Twitter Share on linkedin LinkedIn ORIN successfully treated chlorinated solvent