BAM/PFAS

|BAM/PFAS

In Situ BTEX

DPT Injection – Benzene ORIN successfully treated BTEX contaminated groundwater utilizing ORIN’s patented Bioavailable Absorbent Media (BAM). The primary contaminants, Benzene and Xylene, were prevalent in the two monitoring wells on site. ORIN utilized DPT in order to pinpoint the targeted areas with higher Benzene and Xylene concentrations. A vacuum truck was utilized during chemical

By |2019-10-18T20:07:41+00:00October 18th, 2019|BAM/PFAS|0 Comments

In Situ PCE

BAM Injection – Chlorinated Solvents ORIN successfully conducted two pilot tests to treat groundwater contaminated with chlorinated solvents using BAM, a pyrolized cellulosic material. BAM was mixed with water and injected through 4 and 6 DPT points encompassing MW-03 and MW-04 respectively. A total of 700 and 1,200 gallons of BAM solution was injected through

By |2019-10-31T18:12:23+00:00October 16th, 2019|BAM/PFAS|0 Comments

In Situ PFAS

BAM Former Tannery - Northeast Michigan Soil Mix ORIN conducted a pilot test to treat groundwater contaminated with PFAS using BAM, a pyrolized cellulosic material. BAM was mixed with water and injected through 46 DPT points encompassing PZ-1 and MW-5. A total of 4,445 gallons of BAM solution was injected through the 46 points. During

By |2019-10-16T21:28:49+00:00October 16th, 2019|BAM/PFAS|0 Comments

Ex Situ PFAS

BAM Former Tannery - Northeast Michigan Soil Mix ORIN conducted a pilot test to treat soil contaminated with PFAS using BAM, a pyrolized cellulosic material. BAM was applied directly to contaminated soils and thoroughly mixed with an excavator. Soil was mixed in-situ. Baseline TCLP analysis was not taken thus the pre-treatment number used is from

By |2019-10-31T18:08:11+00:00October 10th, 2019|BAM/PFAS|0 Comments

Top Sliding Bar

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.